电梯导轨简介
电梯导轨是电梯上下行驶在井道的安全路轨,导轨安装在井道壁上,被导轨架,导轨支架固定连接在井道墙壁。电梯常用的导轨是“T”字型导轨。刚性强、可靠性高、安全廉价等特点。
Elevator guideway is a safe track for elevator running up and down in the shaft. The guideway is installed on the wall of the shaft and is guided by the rail frame, which is fixed and connected to the wall of the shaft. The "T" type guide is commonly used in elevators. It is characterized by strong rigidity, high reliability, safety and low cost.
导轨平面必须光滑,无明显凹凸不平表面。由于导轨是电梯轿厢上的导靴和安全钳的穿梭路轨,所以安装时必须保证其间隙。同时导轨在电梯出现超速事故时要承受制停电梯的要任,所以其刚性不可忽视。
The plane of the guide must be smooth without obvious bump surface. Since the guide rail is the shuttle rail of the guide boots and safety pliers on the elevator car, the clearance must be ensured during installation. At the same time, when the elevator overspeed, the guide rail should bear the responsibility of stopping the elevator, so its rigidity can not be ignored.