联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
导轨系统怎么安装才好看
导轨系统怎么安装才好看?
How to install the guide system to look good?
导轨的应用广泛,无论是商业照明还是家居照明,导轨灯都会成为不二之选。但是,导轨买回来,却问题多多。我们今天就来解开这些疑问:导轨怎么安装才好看?安装导轨需要什么配件?导轨有什么连接方法?
Guideway is widely used, whether for commercial lighting or household lighting, the guide lamp will become the best choice. However, there are many problems when the guide is bought back. Let's solve these questions today: How can the guide be installed to look good? What accessories do you need to install the guide rail? What is the connection method of the guide rail?
导轨的安装方式
Installation method of guide rail
1、吸顶式安装
1. Suction-top Installation
将导轨紧贴着天花板,像是吸附在天花板上称之为吸顶式安装。
The guide rail is attached to the ceiling, as if it is adsorbed on the ceiling. It is called suction top installation.
2、嵌入式安装
2. Embedded Installation
天花开槽,将轨道与灯具深藏至槽内,保持天花干净与美感。
Smallpox groove, the track and lamps deep into the groove, to maintain the smallpox clean and aesthetic.
▲ 嵌入式安装
_Embedded Installation
嵌入式安装除了可以保持天花的整洁和美感,另外一方面还能免去安装吊架的空间高度,减少空间压迫感。虽然说嵌入式导轨可以“一藏遮多丑”,但有时候电工师傅把暗槽开的很大,藏也藏不住。
Embedded installation can not only keep the smallpox neat and beautiful, but also avoid the space height of the hanger and reduce the space oppression. Although the embedded guideway can hide ugly, sometimes the electrician opens the dark slot very large and hides it.
▲ 嵌入式安装露出两边的缝隙
_Embedded Installation Exposes Gaps on Both Sides
如果是因为嵌入式安装而开槽,又担心露出来的缝隙难看,降低了颜值。那么使用带有翻边的嵌入式导轨会是一个不错的选择。这样既可以符合嵌入式的安装要求,又可以挡住开槽的缝隙。
If it is grooved because of embedded installation, it is afraid that the exposed cracks are ugly, which reduces the face value. Then it would be a good choice to use embedded guides with flanges. This can not only meet the embedded installation requirements, but also block the slot gap.
▲ 带翻边的嵌入式导轨
_Embedded Guide with Flanging
3、悬吊式安装
3. Suspension Installation
▲ 悬吊式安装
_Suspension Installation
悬吊式安装是奇葩最多的安装方式,下面就给大家举两个反面例子。先来看看第一个,也许是导轨太软导致施工方觉得这个强度会不够,所以就在上面加了一截方钢。实际上导轨本身是可以直接吊起来的,如果使用足够硬的导轨,不必增加方钢等材料也可以吊在天花板上。
Suspension installation is the most exotic way of installation. Here are two negative examples for you. Let's look at the first one. Maybe it's because the guide is too soft that the builder feels the strength will not be enough, so he added a section of square steel to it. In fact, the guide rail itself can be directly suspended. If the guide rail is hard enough, it can also be suspended from the ceiling without adding square steel and other materials.
▲ 导轨上加了方钢
_Square steel is added to the guide rail
另一个是在商场里看到的,有趣的是所有的导轨被横着竖着排成了一个棋盘格式的系统。但是细心观察的你会发现导轨并没有连成系统。图中十字交叉的导轨只是靠近地悬空着。有人会说,那又怎么样,反正没人仔细看。其实这样的做法会增加很多导轨背后的接线和背板,成本就不言而喻了。
Another is seen in the mall. It's interesting to see that all the guideways are arranged horizontally and vertically into a chessboard format system. But if you look carefully, you will find that the guideways are not connected in a systematic way. The crossed rails in the picture are just hanging close to the ground. Someone will say, what about that? Nobody carefully looks at it anyway. In fact, this approach will increase the wiring and backplane behind many guideways, and the cost is self-evident.
▲ 某商场的导轨系统
_Guide system of a shopping mall
但若要搭建纵横交错的导轨系统的话,不妨考虑使用“十”接头,实用之余还能保住颜值。
However, if you want to build a crisscross rail system, you may consider using the "10" connector, while practical, you can also maintain the appearance.
▲ “十”接头
▲ “十”接头
所以导轨系统想要安装得好看又实用,并不是随便两根导轨摆在一起就行了,安装得漂亮真的不是那么简单和那么容易的。在实际工程项目中,有很多种的导轨配件和连接方法可以让整个导轨系统安装得十分的漂亮。
So if you want to install a good looking and practical guide system, you can't just put two guideways together. It's really not so mumen.37ix.com.cn junranji.75ix.com pensuji.89ix.comtongbang.75ix.comfenliqi.75ix.com xuanzhuang.89ix.com simple and easy to install a beautiful guide system. In practical engineering projects, there are many kinds of rail fittings and connection methods that can make the whole rail system installation very beautiful.
导轨配件
Guide fittings
想要导轨安装得安全又牢固的话,可靠的配件是必不可少的。T-bar易力夹是王牌路轨的一款实用性很强的导轨配件,它不需要任何工具,只需要把易力夹放在导轨上,然后用手轻轻旋转就可以轻易锁住轨道。
Reliable accessories are essential if the guide rail is to be installed safely and firmly. T-bar Easy Clip is a practical rail accessory of trump track. It does not need any tools. It only needs to be clamped on the guide rail, and then it can be easily locked by gently rotating with hands.
▲ 天花T-Bar悬吊快装夹件
_Smallpox T-Bar Suspension Fast Fixture
当我们使用两根导轨拼接在一起的时候,但中间的连接部分比较脆弱,可以通过导轨连接吊夹将连接部分加强,起到一个加强筋的作用。
When we use two guideways to splice together, but the connecting part in the middle is relatively fragile. The connecting part can be strengthened by connecting the guide rail with the lifting clamp, thus playing a role of reinforcing ribs.
▲ 导轨连接吊夹和天花悬吊补强板
_Guide rail connecting hanger clamp and ceiling suspension reinforcement plate
如果我们需要用到钢丝,也可以使用这种配钢丝的易力夹。
If we need to use steel wire, we can also use this kind of easy clamp with steel wire.
▲ 易力夹配钢丝
_Easy clamp with steel wire
担心钢线容易晃动的话,可以使用螺杆加强固定,这样通过钢线或者螺杆的搭配使用,可以让轨道系统悬挂的既稳定又“隐身”。
If the steel wire is easy to sway, the screw can be used to strengthen the fixing, so that through the use of steel wire or screw combination, the track system can be suspended both stable and "invisible".
▲ 易力夹配螺杆
_Easy clamp with screw
另外如果我们在店铺里面,做一些店庆、展示类型的活动需要挂海报、旗帜的时候。可以通过挂钩组件把旗帜等装饰物直接挂在导轨系统上。
In addition, if we are in the shop, we need to hang posters and flags when we do some store celebrations and Exhibition activities. Flags and other decorations can be hung directly on the guide rail system through the hook assembly.
▲ 导轨挂钩组件
_Guide rail hook assembly
导轨的连接方法
Connection method of guide rail
在王牌路轨的展厅里,可以看到导轨系统的连接器有很多。这些接头我们应该怎样使用和用在哪里呢,下面继续为大家讲解。
In the exhibition hall of the trump track, you can see that there are many connectors for the rail system. How and where should we use these joints? Let's continue to explain.
▲ 导轨系统的各种连接器件
_Various Connectors of Guideway System
1、方形导轨系统
1. Square guide system
当需要做一个方形导轨系统的时候,我们不需要接线头也不需要接线的尾巴,只需要四个“L”接头就可以了。把这种转角件的圆块捅开,再把这两颗螺丝打开就可以从里面去进线,拼接在一起就形成一个方形的导轨系统。
When we need to make a square guide system, we don't need a terminal or a tail. We just need four "L" joints. Pull the rounds of the corner pieces open, and then open the two screws, you can go into the line from inside, and join them together to form a square guide system.
▲“L”接头
_ "L" connector
2、可转动的“T”接头
2. Rotating "T" Joints
不得不说的是三线导轨系统中的“T”接头和四线导轨系统中的“T”接头是不一样的。在四线导轨系统中,因为三个回路不是对称的,所以"L",“T”接头是有分左右的。
It has to be said that the "T" joint in the three-wire guide system is different from the "T" joint in the four-wire guide system. In the four-wire guideway system, because the three loops are not symmetrical, the "L" and "T" joints are divided around.
▲ 四线导轨分左右
_Four-wire Guide
但是很多人对四线转接头的方向都是分不清的。由于方向性的原因,原本构建一个导轨系统得需要四种接头,但我们使用可转换的“T”接头,现在只需要两种接头就可以了,是不是很方便呢。
But many people are confused about the direction of the four-wire adapter. Because of the directionality, four kinds of joints are needed to build a guideway system, but we only need two kinds of joints to use the convertible "T" joints. Is it convenient?
3、可活动“L”接头
3. Movable "L" connector
在这里跟大家分享一个有趣的玩法,如果需要构建立体的导轨系统,使用可活动“L”接头,这样两个导轨连接起来就可以往两个不同的方向走,从而将整个导轨系统做成三维模式。
Here is an interesting way to share with you. If you need to build a three-dimensional guide system, use movable "L" joints, so that the two guides can be connected in two different directions, thus making the whole guide system into a three-dimensional model.
▲使用了活动“L”接头的导轨
_Guide with movable "L" joint
4、不导电接头
4. Non-conductive Joints
现实中我们看到的导轨系统都
The guideway systems we see in reality are all

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 保定市导轨厂 网址:http://daogui.75ix.com  推荐:电梯导轨,双轴心导轨,实心导轨

网站建设及优化保定遨游网络公司